Contents
- How do I connect the Teufel ONE M to my network?
- How do I establish a Bluetooth connection to the Teufel ONE M?
- Can I use the Teufel ONE M in damp rooms or outdoors?
- Where can I find information on firmware/updates?
- How do I reset the Teufel ONE M (reset)?
How do I connect the Teufel ONE M to my network?
- Make sure that your smartphone or tablet is logged into the home Wi-Fi. Have your access data for your Wi-Fi/home network (SSID/name and password of your Wi-Fi) ready.
- If necessary, download the TEUFEL RAUMFELD APP from the Play Store/App Store.
- After starting the app, the setup wizard will guide you through the setup.
- Further instructions for setting up your Teufel streaming system can be found here.
How do I establish a Bluetooth connection to the Teufel ONE M?
1st connection:
- Activate the Bluetooth function in the settings of your playback device (e.g. smartphone or tablet).
- Briefly press the pairing button (Bluetooth on the back of the device) on your Teufel speaker. Alternatively, you can tap the corresponding speaker in the Raumfeld app under Menu > Settings > Rooms and devices and then start pairing mode.
- Set your device to search for new Bluetooth® devices.
- Then select the Teufel ONE M in the device list of your player and establish a connection.
If your player (e.g. smartphone) was previously connected to the Teufel ONE M:
- Activate the Bluetooth function in the settings of your player (e.g. smartphone).
- Select your Teufel ONE M from the list of saved devices and establish a connection.
Can I use the Teufel ONE M in damp rooms or outdoors?
The device does not have IP certification and is not suitable for permanent use in damp rooms (bathroom etc.) or outdoors (balcony, terrace, garden etc.). We advise against permanent installation/use in outdoor areas/humid rooms.
Where can I find information on firmware/updates?
New firmware for Teufel Raumfeld devices is displayed in the Teufel Raumfeld app (Menu → Settings → Devices → Updates).
Updates for the Teufel Raumfeld app (iOS and Android) are displayed via the respective app stores.
Further information can be found here: General information: Software/Firmware/Drivers/Updates/Apps
How do I reset the Teufel ONE M (Reset)
Note: Resetting the device also resets all system configurations. You must therefore set up the device again afterwards
Reset the device: With the device switched on, press the reset button (12)
with a bent paper clip and hold it down until the device restarts (for at least 8 seconds).
If you want to repair or reinstall the firmware, the following instructions will help you: