ROCKSTER 2: With wheels, without wheels, or mounted on the ROCKSTER ROVER?

With the ROCKSTER 2, you have the choice.

Without wheels:

Without wheels, you position the ROCKSTER 2 on the supplied rubber pads.

With wheels

With the wheels, the ROCKSTER 2 can be safely pushed or pulled. The wheels have a parking brake.

How to mount the wheels:

1. Use a suitable surface. Also make sure your workspace is clean and tidy. This will help you avoid damage.
2. Grab the speaker by the side handles and place it with the rear side down on your surface. Have at least one other person help you.
3. Remove the rubber pads.
    
4. Attach the wheels with the included screws. We recommend mounting the wheels with the parking brake at the back.
    
5. Set the speaker upright again. Have at least one other person help you.

With ROCKSTER ROVER 

The ROCKSTER ROVER raises the ROCKSTER 2 for even better dispersion characteristics. It also allows for a quick switch between stationary and mobile use.

How to mount the ROCKSTER ROVER:

1. Use a suitable surface. Also make sure your workspace is clean and tidy. This will help you avoid damage.
2. Grab the speaker by the side handles and place it with the rear side down on your surface. Have at least one other person help you.
3. If you have mounted the wheels, remove them and reattach the rubber pads.
   
4. Mount the wheels on the ROCKSTER ROVER. 
   
5. Remove the protective cover in the center and attach the adapter/mount for the ROCKSTER ROVER.
   
6. Place the speaker on the ROCKSTER ROVER. Have at least one other person help you. The ROCKSTER 2 must audibly and noticeably click into the ROVER's mounts.
   
7. Secure the ROCKSTER 2 on the ROCKSTER ROVER.
   
8. To remove the ROCKSTER 2 from the ROCKSTER ROVER, release the safety catch