ROCKSTER 2: Replacing the Battery

General Information:

• You can find a new battery for the ROCKSTER 2 in the webshop. 
• Specs: LiFePO4 25.6 V, 3900 mAh
• This battery is charged in the ROCKSTER 2.
• The battery also charges while playing when plugged in.
• The battery is not a toy and must not be used by children. ► The manufacturer or distributor assumes no liability for damages resulting from improper or incorrect use.
• For continuous operation with 230V power or, if not used for a long time, remove the charged battery and disconnect it from the speaker.

Removing and Inserting the Battery

1. Press the latches (45) on the battery cover (44) downward and remove the battery cover to the back.
   
2. Release the hook-and-loop fastener (46) and pull the battery out of the ROCKSTER 2 to the back using the strap (47).
   
3. Insert the battery (48) into the guide rails on the left and right and push it into the speaker. ► The battery must click into place. 
   
4. Secure the hook-and-loop fastener (46). Insert the battery cover (44) into the guide at the bottom until it audibly and noticeably clicks into place.