Back to shop Support for business customers
EN-EU DE-EU ES-EU FR-EU IT-EU NL-EU PL-EU EN-US ES-US
Contact us
EN-EU DE-EU ES-EU FR-EU IT-EU NL-EU PL-EU EN-US ES-US

How can we help?

Articles in this section

See more

ROCKSTER / ROCKSTER AIR: The battery does not charge and/or discharges very quickly. Is this a defect?

The ROCKSTER and ROCKSTER AIR have a central control unit which also stores the battery status. In some cases, however, the software may not process this information accurately.

If you suspect that the battery of your ROCKSTER / ROCKSTER AIR (not for ROCKSTER AIR 2) is not charging properly and/or is discharged very quickly, even though the device was actually charged for a long time beforehand, resetting the control unit (Teufel ROCKSTER reset / Teufel ROCKSTER AIR reset) can help. To perform the reset, disconnect the integrated battery from the device for approx. 60 min. 

 

Teufel ROCKSTER Reset / Teufel ROCKSTER AIR (not for ROCKSTER AIR 2) Reset: Step-by-Step Instructions

  • Unplug the power cord from the wall outlet.
  • Remove the six screws of the battery compartment cover (without affecting the warranty claim, of course).
  • Remove the battery compartment cover.
    In the battery compartment you will see the battery with a red and a black cable with connectors.
    • The red cable always belongs to the positive pole (+) of the battery.
    • The black cable always belongs to the negative pole (-) of the battery.
  • Push the plastic cap from the lug onto the cable so that you can see the lug.
  • Using a small pair of pliers, gently press down the latch (4) and pull the connector (1) off the battery.

mceclip0.png

  • Remove the battery from the device.

    ROCKSTER AIR (see also page 26 of the operating instructions)
    mceclip1.png

ROCKSTER (see also page 19 of the operating instructions)

 

mceclip0.png

  • Leave the device without power supply for 60 minutes.
  • Connect the unit without the battery to the mains and switch it on.
  • After approx. 10 s, disconnect the device from the power supply again and reinsert the battery.
    • Make sure that the cables are connected correctly:
      • The red cable always belongs to the positive pole (+) of the battery.
      • The black cable always belongs to the negative pole (-) of the battery.
  • Now charge the battery for approx. 12 hours.
  • The battery should now reach its normal performance.

If the above steps do not lead to success, please call us.

 

Related articles

Contact us

.