This firmware update improves CD playback on the Teufel KOMBO 62 Mk2 CD receiver. In these instructions, you will learn which files you need and how to install the update using a USB flash drive.
What do I need for the firmware update?
For the update, you need:
- Teufel KB 62 MK2 with remote control
- USB flash drive
- Firmware files (see download below)
- A CD to test playback afterward
Download and prepare the firmware files
- Download the file Firmwareupdate_Kombo62.zip. You can find it in the attachment to this article.
- Extract the ZIP file.
- Copy the following files to your USB flash drive:
- outfile.bin
- updata.cdp
- test.mp3
The MP3 file is only used as a trigger. It is important that it is played on the device before the update.
How do I install the firmware update?
- Insert the prepared USB flash drive into the KB 62 MK2.
- Turn on the KB 62 MK2.
- Select USB as the source.
- Start the MP3 file and make sure it is playing.
- Press and hold the Back button (36) on the remote control for about 5 seconds until playback stops.
- Press and hold the Back button (36) again until “Upgrading” appears on the display.
-
Wait until “Laden...” appears on the display. The firmware update is complete only then.
Important: Do not turn off the KB 62 MK2 or remove the USB flash drive before “Laden...” appears on the display.
- Turn off the KB 62 MK2.
- Remove the USB flash drive.
- Turn the KB 62 MK2 on again.
How do I check CD playback after the update?
- Insert a CD into the KB 62 MK2 and start playback.
- Check whether the CD plays properly.
Translated with the help of AI