Version 1.5.1
Fixed:
- The device did not wake up from standby on an optical input signal (STEREO M 2)
- Quickly pressing the previous-track button twice did not jump to the previous track
- TIDAL: after muting, unmuting did not restore the previous volume (when controlled from iOS)
- Bluetooth: speakers were not discovered by some Bluetooth transmitters (e.g. FeinTech BT200)
New:
- Improved reliability of Google Cast when the device's software restarts internally
- Improved reliability when powering off or factory-resetting an unresponsive device
How to install the update:
The update is transmitted wirelessly (“Over-The-Air”) via the internet to your STEREO M2/L2 and installed automatically. Make sure your STEREO M2/L2 is connected to the internet so the update can be installed. During the update process, the three LEDs on the left and the three LEDs on the right will blink alternately.
What to do if the update fails.
If the device remains stuck in update or bootloader mode for more than 15 minutes after the update (indicated by the alternating blinking LEDs), try one of the following solutions:
- Restart: Unplug the power cord. Plug the power cord back in.
- Restart the update: Check if your STEREO M2/L2 is visible in the Teufel Home App. Initiate the update through the app. The device will then restart.
Translated with the help of AI