The ROCKSTER XS offers the Stereo Connect feature. Using this feature, you can connect one ROCKSTER XS to a second ROCKSTER XS and enjoy your music in stereo. A connection with a playback device can already exist, or it can be established subsequently.
Prerequisites: To use the Stereo Connect function, you need 2 ROCKSTER XS of the same hardware generation. Unfortunately, it is not possible to connect 2 devices of different generations due to technical changes.
Range: Please note that the Stereo Connect function works safely up to a maximum distance of 2 meters between the devices. During operation, make sure that there are no obstacles (furniture, plants, people) between the devices.
Establish Stereo Connect connection: On device 1, briefly press the Bluetooth button and the Volume + button simultaneously - the three status LEDs will flash. Now repeat the process on device 2. The connection is now automatic. For detailed information, please refer to the instructions on pages 22/23.
Further notes:
- Depending on the installation location and type, the range in Stereo Connect mode may vary. Place the two ROCKSTER XS so that they have direct "line of sight" and are no more than 1 to 2 m apart.
- If you switch off a ROCKSTER XS, the connected ROCKSTER XS will also be switched off.
- If both ROCKSTER XS are switched on again, they will connect again automatically. To disconnect permanently, press the Bluetooth and Volume buttons simultaneously on one of the devices -.