ROCKSTER NEO Battery Replacement

Note: All information also applies to Fender X Teufel ROCKSTER NEO.

General Information:

• You can find a new battery for the ROCKSTER NEO/Fender x Teufel ROCKSTER NEO in the webshop. 
• Powerful high-performance LiFePO4 battery with deep discharge protection for the ROCKSTER NEO and Fender x Teufel ROCKSTER NEO
• This battery is charged in the NEO.
• Battery also charges while playing when connected to AC power
• The battery is not a toy and must not be used by children. ► The manufacturer or distributor assumes no liability for damages caused by improper or incorrect use.
• For continuous operation with 230V AC power or prolonged non-use, remove the charged battery and disconnect it from the speaker.

Removing and Inserting the Battery 

1. Turn off the device and, if applicable, unplug the power cable

   

2. Press the tabs (29) on the battery cover (28) downward and remove the battery cover backward. 
   
    
3. Undo the Velcro strap (30).
    
    
4. Pull the battery back first out of the speaker using the loop (31). 
   
    
5. Place battery (2) onto the guide rails on the left and right and slide it into the speaker. ► The battery must click into place.
    
    
6. Fasten the Velcro strap (30). 
   
    
7. Insert the battery cover (28) into the lower guide and lock it into place. ► The battery cover (28) must click and lock audibly and obviously. 
   
    
8. You can now turn the device back on. To charge, reconnect the power plug.