Connect the ROCKSTER NEO to another NEO using an XLR cable

To connect two ROCKSTER NEOs together using an XLR cable, follow these steps:

1. Connect your external audio source to the first NEO (e.g. smartphone via Bluetooth)
2. Press the button (13) on the first NEO 3 times. The button (13) lights up green. The NEO switches to wired mode and activates the LINE/ COMPANION output
   
3. Connect the XLR cable to the LINE/COMPANION OUT socket (25) on the first NEO.
   
4. Connect the XLR cable to one of the XLR combo sockets (23)/(24) on the second NEO.
5. Press the button (13) on the second NEO 3 times.
6. Now set the second NEO (Companion) to full volume by hand
7. Change the volume on the master NEO (slightly) - whether louder or quieter. There is now a stereo link via XLR cable connection.
8. Now you can set which NEO should function as the left or right speaker.
   To do this, press the button (13) on the master NEO and select the desired setting (LEFT, RIGHT, MONO)
   The LED for the selected setting lights up white.
   The setting on the MASTER determines which signal is transmitted to the COMPANION:
   MASTER MONO - COMPANION MONO
   MASTER LEFT - COMPANION RIGHT
   MASTER RIGHT - COMPANION LEFT
9. The volume control for both speakers only works from the master NEO.